Medium Pressure Stainless Steel Braided Teflon® Hose    

This Hose can be special ordered with any fitting configuration and in any length using our Custom Ordering Form  

T1167 Medium Pressure Teflon® Hose
hose - general purpose - used for brake lines
Temperature Range -100°F to 500°F (-73°C to 260°C) Intermittent Service
-65°F to 450°F (-54°C to 232°C) Continuous Service
Meets or exceeds SAE 100R14 specifications.
General purpose smooth bore hose of Teflon®

T1167 - .030 wall, non-conductive virgin PTFE tubing, overbraided with 300 series stainless steel wire.

  Hose Size Average I.D. Average O.D. Operating Pressure Burst Pressure Bend Radius (in)
  3/16 .125 .250 3000 12000 2
* 1/4 .187 .312 3000 12000 2
  5/16 .250 .375 3000 12000 3
* 3/8 .312 .445 2500 10000 4
* 1/2 .405 .549 2000 8000 5.2
  5/8 .500 .648 1500 6000 6.5
  3/4 .625 .625 1200 4800 7.7
  1 .875 1.030 1000 4400 9

-3 through -6 Available with clear chafe cover
-3 Teflon Hose Now Available in YELLOW, BLACK, RED, BLUE and PURPLE
*Denotes Conductive line to prevent static discharge

Stainless Steel Braided Teflon® Brake Lines and Hose Assemblies

These assemblies can be special ordered in any configuration and in any length using our Custom Ordering Form

Hose Types

 

General Purpose
Off-road only brake lines,  Hoses for Gauges, Hydraulic clutch lines or other hydraulic systems. *Contact us for DOT. approved brake lines.


Fuel Lines

Nitrous Oxide supply lines


Refer to hose ends for special crimp on hose end configurations.

Bonaco Inc. Hose and Fittings / Brake Lines
1846 W. 11th. St.
Unit I
Upland, CA 91786		 Phone: 909 - 985 - 3429
Fax: 909 - 946 - 5625
Email: bonacoinc@bonacoinc.com

www.bonacoinc.com